Service Manual

Field Description
when Displays the last time the switch received an NTP packet.
poll Displays the polling interval (in seconds).
reach Displays the reachability to the peer (in octal bitstream).
delay Displays the time interval or delay for a packet to complete
a round-trip to the NTP time source (in milliseconds).
offset Displays the relative time of the NTP peer’s clock to the
switch clock (in milliseconds).
disp Displays the dispersion.
Example
Dell#show ntp associations
remote ref clock st when poll reach delay offset disp
=============================================================
10.10.120.5 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
*172.16.1.33 127.127.1.0 11 6 16 377 -0.08 -1499.9
104.16
172.31.1.33 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
* master (synced), # master (unsynced), + selected, - candidate
Dell#
Related
Commands
show ntp status — displays the current NTP status.
show ntp vrf associations
Displays the NTP servers configured for the VRF instance <vrf-name>.
Syntax show ntp [vrf] <vrf-name> associations.
Command Modes EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0) Added support for VRF.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
System Time and Date
1773