Service Manual

all Enter the keyword all to copy the designated image to all

stack members.

A Enter the keyword A to upgrade all stacked units in System A

( only).

B Enter the keyword B to upgrade all stacked units in System B

( only).

Defaults none

Command Modes EXEC

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8.(0.0) Introduced on the S3048-ON and S3048–ON.

9.7(0.0) Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

Usage Information To reboot using the new image, use the upgrade boot system stack-unit

command.

Commands

• reload — reboots Dell Networking OS.

• reset stack-unit — resets the designated stack member.

• show system (S-Series and Z-Series) — displays the status of all stack members

or a specific member.

• show version — displays the current Dell Networking OS version information on

the system.

Stacking

1731