Service Manual

show logging — displays the logging setting and system messages in the internal
buffer.
logging extended
Logs security and audit events to a system log server.
Syntax
logging extended
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Usage Information
This command is available with or without RBAC enabled. When RBAC is enabled
you can restrict access to audit and security logs based on the CLI sessions’ user
roles. If extended logging is disabled, you can only view system events, regardless
of RBAC user role.
When you enabled RBAC and extended logging:
• Only the system administrator role can execute this command.
• The system administrator and system security administrator roles can view
security events and system events.
• The system administrator role can view audit, security, and system events.
• The network administrator and network operator roles can view system events.
Examples
Dell(conf)#logging extended
Related
Commands
show logging auditlog — displays audit log, clear logging auditlog— clears audit log
logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
1700
Simple Network Management Protocol (SNMP) and Syslog