Service Manual

Parameters
clients Enter the keyword clients to display IFM client
information.
summary (OPTIONAL) Enter the keyword summary to display brief
information about IFM clients.
ifagt number Enter the keyword ifagt then the number of an interface
agent to display software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface
IDs then the slot/port[/subport] information to display
interface control block information for that interface:
• For a port channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
stack-unit unit-ID Enter the keyword stack-unit then the stack member
number to display IFM information for that unit.
NOTE: This option is only available on the S-Series.
trace-flags Enter the keyword trace-flags to display IFM information
for internal trace flags.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
162
Control and Monitoring