Service Manual

To disable periodic re-authentication, use the no dot1x reauthentication
command.
Parameters
interval seconds (Optional) Enter the keyword interval then the interval
time, in seconds, after which re-authentication is initiated.
The range is from 1 to 31536000 (1 year). The default is3600
(1 hour).
Defaults 3600 seconds (1 hour)
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Related
Commands
interface range — configures a range of interfaces.
dot1x reauth-max
Configure the maximum number of times a port can re-authenticate before the port becomes
unauthorized.
Syntax
dot1x reauth-max number
To return to the default, use the no dot1x reauth-max command.
Parameters
number Enter the permitted number of re-authentications. The
range is from 1 to 10. The default is 2.
Defaults 2
Command Modes INTERFACE
Security
1605