Service Manual

Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
CAUTION: Encrypting passwords with this command does not provide a
high level of security. When the passwords are encrypted, you cannot return
them to plain text unless you re-configure them. To remove an encrypted
password, use the no password password command.
To keep unauthorized people from viewing passwords in the switch configuration
file, use the service password-encryption command. This command
encrypts the clear-text passwords created for user name passwords, authentication
key passwords, the privileged command password, and console and virtual
terminal line access passwords.
To view passwords, use the show running-config command.
show privilege
View your access level.
Syntax
show privilege
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1574
Security