Service Manual

method-list-name Enter a text string (up to 16 characters long) to name the list
of enabled authentication methods activated at login.
method Enter one of the following methods:
• enable: use the password the enable password
command defines in CONFIGURATION mode.
• line: use the password the password command
defines in LINE mode.
• none: no authentication.
• radius: use the RADIUS servers configured with the
radius-server host command.
• tacacs+: use the TACACS+ server(s) configured with
the tacacs-server host command.
... method2 (OPTIONAL) In the event of a “no response” from the first
method, Dell Networking OS applies the next configured
method.
Defaults Use the enable password.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced on the E-Series.
Usage Information
By default, the Enable password is used. If you configure aaa authentication
enable default, Dell Networking OS uses the methods defined for Enable
access
instead.
Methods configured with the aaa authentication enable command are
evaluated in the order they are configured. If authentication fails using the primary
method, Dell Networking OS employs the second method (or third method, if
1562
Security