Service Manual

show processes cpu
Display CPU usage information based on processes running.
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit
id | summary | [stack-unit id]]
Parameters
management-unit
1-99 [details]
(OPTIONAL) Display processes running in the control
processor. The 1-99 variable sets the number of tasks to
display in order of the highest CPU usage in the past five (5)
seconds. Add the keyword details to display all running
processes (except sysdlp). Refer to Example (management-
unit).
stack-unit id (OPTIONAL) Enter the keyword stack-unit then the stack
member ID.
As an option of the show processes cpu command, this
option displays CPU usage for the designated stack
member. Or, as an option of the
command, this option limits
the output of memory statistics to the designated stack
member. . The unit ID range is from 1 to 6.
Refer to Example (stack-unit).
summary (OPTIONAL) Enter the keywordsummary to view CPU
utilization of processes related to stack-unit processing.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added the keywords management-unit [details].
7.6.1.0 Introduced on the S-Series.
154
Control and Monitoring