Service Manual

• Queue : 0 0 0 1 2 3 3 3
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information trust dot1p, do1p-priority, service-class dynamic dot1; all these features work over
the mapping in this command output.
Related
Commands
service-class dot1p-mapping — Identifies the class map.
show qos policy-map
View the QoS policy map information.
S4048–ON
Syntax
show qos policy-map {summary [interface] | detail}
Parameters
summary
interface
To view a policy map interface summary, enter the keyword
summary and optionally one of the following keywords and
slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
detail To view a policy map interface in detail, enter the keyword
detail and optionally one of the following keywords and
slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
1466
Quality of Service (QoS)