Service Manual

Parameters

vlan-list Enter the list of secondary VLANs to associate with the

selected primary VLAN. The list can be in comma-delimited

or hyphenated-range format, following the convention for

the range input.

Defaults none

Command Modes INTERFACE VLAN

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048–ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the C-Series and S-Series.

Usage Information The list of secondary VLANs can be:

• Specified in comma-delimited or hyphenated-range format.

• Specified with this command even before they have been created.

• Amended by specifying the new secondary VLAN to be added to the list.

Commands

private-vlan mode — sets the mode of the selected VLAN to community, isolated,

or primary.

switchport mode private-vlan — sets PVLAN mode of the selected port.

switchport mode private-vlan

Set PVLAN mode of the selected port.

S4048

Syntax

[no] switchport mode private-vlan {host | promiscuous | trunk}

Private VLAN (PVLAN)

1413