Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1361

source-port-

range

Enter the keywords Source-port-range then the range of

the start port to end port to be matched in the ACL rule in

the ICAP rule.

destination-port-

range

Enter the keywords destination-port-range then the

range of the start port to end port to be matched in the ACL

rule in the ICAP rule.

Defaults none

Command Modes REDIRECT-LIST

Command History

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048–ON.

9.7(0.0) Introduced on the S6000-ON.

9.7(0.0) Added support for the track-id on the S4810, S4820T,

S6000, and Z9000.

9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.

show cam pbr

Display the PBR CAM content.

Syntax

show cam pbr {[interface interface] | stack—unit slot-number port-set number]} [summary]

Parameters

interface interface Enter the keyword interface then the name of the interface.

stack–unit

number

Enter the keyword stack-unit then the slot number.

port-set number Enter the keywords port-set then the port-pipe number.

summary Enter the keyword summary to view only the total number of CAM entries.