Service Manual

To remove an IPsec encryption policy from an interface, enter the no area area-id
encryption spi number command.
Related
Commands
ipv6 ospf encryption – configures an IPsec encryption policy on an OSPFv3
interface.
show crypto ipsec policy – display the configuration of IPsec encryption policies.
clear ipv6 ospf process
Reset an OSPFv3 router process without removing or re-configuring the process.
Syntax
clear ipv6 ospf [vrf vrf-name] process
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of
the VRF to clear IPv6 routes corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for C-Series.
7.4.1.0 Introduced on the E-Series.
debug ipv6 ospf bfd
Display debug information and interface types for bidirectional forwarding detection (BFD) on OSPF IPv6
packets.
Syntax
[no] debug ipv6 ospf bfd [interface]
Open Shortest Path First (OSPFv2 and OSPFv3)
1323