Service Manual

Parameters
object-id Enter the ID number of the tracked object. The range is 1 to
500.
ip-address/
prefix-len
Enter an IPv4 address in dotted decimal format. The valid
IPv4 prefix lengths are from /0 to /32.
vrf vrf-name (Optional) You can configure a VPN routing and forwarding
(VRF) instance to specify the virtual routing table to which
the tracked route belongs.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.8(0.1) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S48201T, S4810, S6000, S5000, Z9000,
Z9500, IOA, and MXL.
track ip route metric threshold
Configure object tracking on the threshold of an IPv4 route metric.
Syntax
track object-id ip route ip-address/prefix-len metric threshold
[vrf vrf-name]
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. The range is 1 to
500.
ip-address/
prefix-len
Enter an IPv4 address in dotted decimal format. The valid
IPv4 prefix lengths are from /0 to /32.
vrf vrf-name (Optional) E-Series only: You can configure a VPN routing
and forwarding (VRF) instance to specify the virtual routing
table to which the tracked route belongs.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Object Tracking
1227