Service Manual

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.3(0.1) Introduced on the S4810, S4820T, S6000, and Z9000.
8.3.11.1 Introduced on the Z9000
8.2.1.0 Increased number of VLANs on ExaScale to 4094 (was
2094)
8.1.1.0 Introduced on E-Series ExaScale
7.6.1.0 Support added for S-Series
7.5.1.0 Introduced on C-Series
Related
Commands
ip ftp source interface
Configuring source interface for ftp communications.
ip http vrf
Configures an HTTP client with a VRF that is used to connect to the HTTP server.
Syntax
ip http vrf {management | vrf-name}
To undo the HTTP client configuration, use the ip http vrf command.
Parameters
management Enter the keyword management for configuring the
management VRF that uses an HTTP client.
vrf-name Enter the name of the VRF for configuring a nondefault that
uses an HTTP client.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S3048-
ON, S4048-ON, S6000–ON, and Z9500.
116
Control and Monitoring