Service Manual

Restart ACK rcv count : 0 (level-1), 0 (level-2)
Restart Req rcv count : 0 (level-1), 0 (level-2)
Suppress Adj rcv count : 0 (level-1), 0 (level-2)
Restart CSNP rcv count : 0 (level-1), 0 (level-2)
Database Sync count : 0 (level-1), 0 (level-2)
show isis hostname
Display IS-IS host names configured or learned on the switch.
Syntax
show isis [vrf vrf-name] hostname
Parameters
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to
display IS-IS host names corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Example
Dell#show isis hostname
System Id Dynamic Name Static Name
*F100.E120.0013 Force10 ISIS
Dell#
1066
Intermediate System to Intermediate System (IS-IS)