Service Manual

Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of
the VRF to display IS-IS link state database corresponding to
that VRF.
NOTE: If you do not specify this option, the IS-IS link
state database corresponding to the default VRF are
displayed.
level-1 (OPTIONAL) Displays the Level 1 IS-IS link-state database.
level-2 (OPTIONAL) Displays the Level 2 IS-IS link-state database.
local (OPTIONAL) Displays local link-state database information.
detail (OPTIONAL) Displays the detailed link-state database
information of each LSP when specified. If not specified, a
summary displays.
summary (OPTIONAL) Displays the summary of link-state database
information when specified.
lspid (OPTIONAL) Display only the specified LSP.
system-id (OPTIONAL) Displays the link-state database for system-id.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Introduced on the Z9000.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.1 Introduced on the S4810.
Usage Information The following describes the show isis database command shown in the
following example.
Field Description
IS-IS Level-1/
Level-2 Link State
Database
Displays the IS-IS link state database for Level 1 or Level 2.
1062
Intermediate System to Intermediate System (IS-IS)