Service Manual

Enabling DHCP Snooping
To enable DHCP snooping, use the following commands.
1. Enable DHCP snooping globally.
CONFIGURATION mode
ip dhcp snooping
2. Specify ports connected to DHCP servers as trusted.
INTERFACE mode
INTERFACE PORT EXTENDER mode
ip dhcp snooping trust
3. Enable DHCP snooping on a VLAN.
CONFIGURATION mode
ip dhcp snooping vlan name
Enabling IPv6 DHCP Snooping
To enable IPv6 DHCP snooping, use the following commands.
1. Enable IPv6 DHCP snooping globally.
CONFIGURATION mode
ipv6 dhcp snooping
2. Specify ports connected to IPv6 DHCP servers as trusted.
INTERFACE mode
ipv6 dhcp snooping trust
3. Enable IPv6 DHCP snooping on a VLAN or range of VLANs.
CONFIGURATION mode
ipv6 dhcp snooping vlan vlan-id
Adding a Static Entry in the Binding Table
To add a static entry in the binding table, use the following command.
• Add a static entry in the binding table.
EXEC Privilege mode
ip dhcp snooping binding mac
Adding a Static IPV6 DHCP Snooping Binding Table
To add a static entry in the snooping database, use the following command.
• Add a static entry in the snooping binding table.
EXEC Privilege mode
Dynamic Host Configuration Protocol (DHCP)
339