Service Manual

------ ------ ----------- --- ---- --------- --------
0 Te 1/1 Te 1/2 rx Flow N/A N/
A
Configuring UDF ACL
To configure a User Defined Field (UDF) ACL:
1. Enable the UDF ACL feature on a switch.
CONFIGURATION mode
feature udf-acl
Dell(conf)#feature udf-acl
2. Change the default CAM allocation or reconfigure new CAM allocation settings and enable IPV4
UDF.
CONFIGURATION mode
cam-acl {default | l2acl number ipv4acl number ipv6acl number ipv4qos number
l2qos number l2pt number ipmacacl number [vman-qos | vman-dual-qos number]
ecfmacl number [nlbclusteracl number] ipv4pbr number }openflow number | fcoe
number} [ipv4udfenable] [iscsioptacl number] [vrfv4acl number]
Dell(conf)#cam-acl l2acl 1 ipv4acl 8 ipv6acl 2 ipv4qos 0 l2qos 2 l2pt 0
ipmacacl 0 vman-qos 0 ecfmacl 0 ipv4udfenable
3. View the currently configured CAM allocation.
EXEC mode
EXEC Privilege mode
show cam-acl
Dell#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes) Next Boot(in block sizes)
1 block = 256 entries
L2Acl : 2 1
Ipv4Acl : 2 8(UdfEnabled)
Ipv6Acl : 0 2
Ipv4Qos : 2 0
L2Qos : 1 2
L2PT : 0 0
IpMacAcl : 0 0
VmanQos : 0 0
EcfmAcl : 2 0
FcoeAcl : 4 0
iscsiOptAcl : 0 0
ipv4pbr : 0 0
vrfv4Acl : 0 0
Openflow : 0 0
fedgovacl : 0 0
nlbclusteracl: 0 0
-- stack-unit 0 --
Current Settings(in block sizes) Next Boot(in block sizes)
158
Access Control Lists (ACLs)