Service Manual

entry is created only for group 239.0.0.1. VLAN 300 has no access list limiting Receiver 1, so both IGMP reports are accepted
and two corresponding entries are created in the routing table.
Figure 48. Preventing a Host from Joining a Group
The following table lists the location and description shown in the previous illustration.
Table 33. Preventing a Host from Joining a Group — Description
Location Description
1/21
• Interface TenGigabitEthernet 1/21
• ip pim sparse-mode
• ip address 10.11.12.1/24
• no shutdown
1/31
• Interface TenGigabitEthernet 1/31
• ip pim sparse-mode
• ip address 10.11.13.1/24
Internet Group Management Protocol (IGMP) 363