Administrator Guide
Lines
Beginning With
Description
Dell EMC
Application...
Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell EMC
Networking OS
uptime is...
Amount of time the system has been up
System image... Image file name
System Type: System name
Control
Processor:...
Control processor information and amount of memory on processor
128K bytes... Amount and type of memory on system
1 Route
Processor...
Hardware configuration of the system, including the number and type of physical
interfaces available
upgrade
Upgrade the bootflash image or system image of the management unit.
Syntax
upgrade boot {all | bootflash—image | bootselector-image} stack-unit {stack-
unit-number | all} {booted | flash: | ftp: | nfsmount | scp: | tftp: |
usbflash:} file-url
Parameters
boot Enter the keyword boot to change the boot image.
system Enter the keyword system to change the system image.
ftp: After entering the keyword ftp:, you can either follow it with the location of the source
file in this form: //userid:password@hostip/filepath or press Enter to launch a
prompt sequence.
scp: After entering the keyword scp:, you can either follow it with the location of the source
file in this form: //userid:password@hostip/filepath or press Enter to launch a
prompt sequence.
slot0: After entering the keyword slot0:, you can either follow it with the location of the
source file in this form: //hostlocation/filepath or press Enter to launch a
prompt sequence.
tftp: After entering the keyword tftp:, you can either follow it with the location of the source
file in this form: //hostlocation/filepath or press Enter to launch a prompt
sequence.
flash: After entering the keyword flash:, you can either follow it with the location of the
source file in this form: flash//filepath or press Enter to launch a prompt sequence.
A:
|
B:
Enter the partition to upgrade from the flash.
stack-unit: Enter the keywords stack-unit: to synch the image to the stack-unit.
file-url
Enter the following location keywords and information to upgrade using an Dell EMC
Networking OS image other than the one currently running:
• To specify an Dell EMC Networking OS image on the internal flash, enter flash://
file-path/filename.
80 File Management