Service Manual

show interfaces port-channel
Display information on configured Port Channel groups.
Syntax
show interfaces port-channel [channel-number] [brief]
[description]
Parameters
channel-number For a Port Channel interface, enter the keyword port-channel
then a number. The range is from 1 to 128.
NOTE: This command also enables you to view
information corresponding to a range of ports.
• For port-channel interfaces, you can specify
multiple ports as port-range. For example, if you
want to display information corresponding to all
ports between 1 and 4, specify the port range as
show interfaces port-channel 1 - 4.
brief (OPTIONAL) Enter the keyword brief to display only the port
channel number, the state of the port channel, and the number
of interfaces in the port channel.
description (OPTIONAL) Displays the port-channel information with
description.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.9(0.0) Added support to display the interface configurations
corresponding to a range of ports.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Interfaces 926