Service Manual

Table Of Contents

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

9.1(0.0) Introduced on S4810 and Z9000.

8.3.19.0 Introduced on S4820T.

Usage Information Include the colon (:) when entering this command. This command checks the specified

flash memory for errors. If errors are found, the command recommends that you

format the flash.

CAUTION: If you elect to format the flash, all files – including the startup

configuration file – are lost. If you do decide to format the specified flash,

consider saving the running configuration as the startup configuration after

formatting the flash (use the write memory command or copy running-

config startup-config command).

Commands

• copy — copy one file to another location.

• show file-systems — display information about the file systems on the system.

mkdir

Creates a directory on the NFS mounted file system.

Syntax

mkdir nfsmount://mount-point/usrname

Command Modes CONFIGURATION