Service Manual

Example
The following example shows how to clear the discard counters globally:
Dell> clear ip dhcp snooping source-address-validation discard-
counters
The following example shows how to clear the discard counters on an interface:
Dell> clear ip dhcp snooping source-address-validation discard-
counters interface TenGigE 1/10
The following example shows how to clear the discard counters on a port channel
interface:
Dell> clear ip dhcp snooping source-address-validation discard-
counters interface portchannel 1
Related
Commands
• show ip dhcp snooping — display the contents of the DHCP binding table.
clear ipv6 dhcp snooping binding
Clear all the DHCPv6 snooping binding database entries.
Syntax
clear ipv6 dhcp snooping binding
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-
Series.
Example
Dell# clear ipv6 dhcp snooping?
binding Clear the snooping binding database
ip dhcp relay
Enable Option 82.
Syntax
ip dhcp relay information-option [remote-id | trust-downstream]
Dynamic Host Configuration Protocol (DHCP) 700