Service Manual

Example displaying
queue range
show hardware buffer-stats-snapshot
Displays buffer statistics tracking resource information for a specific interface.
Syntax
show hardware buffer-stats-snapshot resource interface interface
{{priority-group {id | all} | queue ucast {id | all} mcast {id |
all} | all} [detail]}
Parameters
interface interface
Enter any of the following keywords and the interface
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
queue
Enter the keyword queue followed by all for displaying details of
all queues, ucast queue-id or all for displaying Unicast queue
details, and
mcast queue-id or all for displaying Multicast
queue details.
priority-group Enter the keyword priority-group followed by id for specific
priority-group or keyword all.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,
Z9000, Z9500.
Debugging and Diagnostics 678