Service Manual

Field Description
The output format is:
Time
Established
Display Example
< 1 day 00:12:23 (hours:minutes:seconds)
< 1 week 1d21h (DaysHours)
> 1 week 11w2d (WeeksDays)
State/Pfxrcd
If the neighbor is in Established stage, the number of network
prefixes received.
If a maximum limit was configured with the neighbor
maximum-prefix command, (prfxd) appears in this column.
If the neighbor is not in Established stage, the current stage is
displayed (Idle, Connect, Active, OpenSent, OpenConfirm).
When the peer is transitioning between states and clearing the
routes received, the phrase (Purging) may appear in this column.
If the neighbor is disabled, the phrase (Admin shut) appears in
this column.
Example
Dell# show ip bgp summary
BGP router identifier 192.168.11.5, local AS number 100
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
2 network entrie(s) using 152 bytes of memory
2 paths using 208 bytes of memory
BGP-RIB over all using 210 bytes of memory
2 BGP path attribute entrie(s) using 144 bytes of memory
1 BGP AS-PATH entrie(s) using 10 bytes of memory
2 neighbor(s) using 16384 bytes of memory
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down
State/Pfx
172.16.0.2 200 10 8 0 0 0 00:05:34 2
192.168.10.2 100 0 22 0 0 0 00:00:00
(shut)
Dell#
show running-config bgp
To display the current BGP configuration, use this feature.
Syntax
show running-config bgp
Defaults none
Command Modes EXEC Privilege
Border Gateway Protocol 556