Service Manual

show ip bgp filter-list
View the routes that match the filter lists.
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] filter-list as-path-name
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the
VRF to view route information that matches the filter lists
corresponding to that VRF.
ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to view information related only to ipv4 multicast
routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
unicast to view information related only to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword
unicast to view information related only to ipv6 unicast routes.
as-path-name Enter an AS-PATH access list name. The range is 140 characters.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Border Gateway Protocol 535