Service Manual

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information After you enter this command, the software deletes the history routes and returns the
suppressed routes to the Active state.
The clear ip bgp dampening command does not clear the history paths.
clear ip bgp flap-statistics
Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
Syntax
clear ip bgp [vrf vrf-name] [ipv4 [multicast | unicast] | ipv6
unicast] [flap-statistics [ipv4-address mask | ipv6–address mask]
| filter-list as-path-name | regexp regular-expression]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the
VRF to clear BGP flap statistics corresponding to that VRF.
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
Border Gateway Protocol 463