Service Manual

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
6.5.1.0 Expanded to include the as-number option.
Related
Commands
• bgp recursive-bgp-next-hop — disable next-hop resolution through other routes
learned by the BGP.
clear ip bgp dampening
Clear information on route dampening and return the suppressed route to the Active state.
Syntax clear ip bgp [vrf vrf-name] [ipv4 [multicast | unicast] | ipv6
unicast] [dampening [ipv4-address mask | ipv6–address mask]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the
VRF to clear information on route dampening corresponding to
that VRF
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
multicast to clear the ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword
unicast to clear the ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword
unicast to clear the ipv6 unicast routes.
ipv4-address
mask
(OPTIONAL) Enter an IPv4 address in dotted decimal format and
the prefix mask in slash format (/x) to clear dampening
information only that BGP neighbor.
ipv6–address
mask
(OPTIONAL) Enter the IPv6 address and the network mask to
clear information on IPv6 route dampening.
Border Gateway Protocol 462