Service Manual

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
Peering sessions are reset when you change the router ID of a BGP router.
This command automatically restarts the BGP instance for the configuration to take
effect.
clear ip bgp
Reset BGP sessions. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting the
TCP connection.
Syntax
clear ip bgp [vrf vrf-name] [* | <1–4294967295> | <0.1–
65535.65535> | A.B.C.D {soft {in | out}} | X:X:X:X::X {soft {in |
out}} | dampening | flap-statistics | ipv4 | ipv6 | peer-group]
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to clear all
BGP sessions corresponding to that VRF.
NOTE: Use this attribute to clear a BGP instance
corresponding to either a specific address family in a
default VRF or an IPv4 address family in a a non-default
VRF.
* Enter an asterisk ( * ) to reset all BGP sessions.
Border Gateway Protocol 460