Service Manual

To return to the default value, use the no bgp default local-preference
command.
Parameters
value Enter a number to assign to routes as the degree of preference
for those routes. When routes are compared, the higher the
degree of preference or local preference value, the more the
route is preferred. The range is from 0 to 4294967295. The
default is 100.
Defaults 100
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
All routers apply the bgp default local-preference command setting within the
AS. To set the local preference for a specific route, use the set local-preference
command in ROUTE-MAP mode.
Related
Commands
• set local-preference — assign a local preference value for a specific route.
Border Gateway Protocol 450