Service Manual

To disable a dot or dot+ representation and return to ASPLAIN, enter the no bgp
asnotation command.
Defaults asplain
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced the dynamic application of AS notation changes.
8.2.1.0 Introduced.
Usage Information
Before enabling this feature, enable the enable bgp four-octet-as-
supportcommand. If you disable the four-octect-support command after using
dot or dot+ format, the AS numbers revert to asplain text.
When you apply an asnotation, it is reflected in the running-configuration. If you
change the notation type, the running-config updates dynamically and the new
notation shows.
Example
Dell(conf)# router bgp 1
Dell(conf-router_bgp)#bgp asnotation asdot
Dell(conf-router_bgp)# ex
Dell(conf)#do show run | grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asdot
Dell(conf)#router bgp 1
Dell(conf-router_bgp)# bgp asnotation asdot+
Dell(conf-router_bgp)# ex
Dell(conf)#do show run | grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asdot+
Dell(conf)#router bgp 1
Border Gateway Protocol 438