Service Manual

| 174
Codes: * - cam usage is above 90%.
Example 4: Output
of the show cam-
usage switch
Command
Dell#show cam-usage switch
Stackunit|Portpipe| CAM Partition | Total CAM | Used CAM |
Available CAM
========|========|=================|=============|=============|
==============
1 | 0 | IN-L2 ACL | 1536 | 0
| 1536
| | OUT-L2 ACL | 206 | 9
| 197
2 | 0 | IN-L2 ACL | 1536 | 0
| 1536
| | OUT-L2 ACL | 206 | 9
| 197
3 | 0 | IN-L2 ACL | 1536 | 0
| 1536
| | OUT-L2 ACL | 206 | 9
| 197
Codes: * - cam usage is above 90%.
show running config acl-vlan-group
Display the running configuration of all or a given ACL VLAN group.
Syntax
show running config acl-vlan-group group name
Parameters
group-name
Display only the ACL VLAN group that is specified. The
maximum group name is 140 characters.
Default None
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM) 411