Service Manual

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information The authenticator completes authentication only when you set port-control to
auto.
dot1x profile
Configure a dot1x profile to define a list of trusted supplicant MAC addresses.
Syntax
[no] dot1x profile profile-name
Parameters
profile-name Enter a dot1x profile-name. The profile name length is limited
to 32 characters.
Defaults None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Error Strings NONE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S3100 series, S4048–ON, S4048–ON, S4810,
S4820T, S5000, S6000, S6000–ON, the Configuration Terminal
Batch mode on C9010, Z9100–ON, and Z9500.
9.9(0.0) Introduced on the C9010.
Usage Information
The dot1x profile command configures a dot1x profile to define a list of trusted
supplicant MAC addresses. Maximum number of dot1x profiles is limited to 10. This
command launches dot1x profile mode for entering profile related commands such as
802.1X 221