Service Manual

Parameters
secure Enter the keyword secure to delete all its database and
hardware flows/resources, when the VTEP loses connectivity
with the controller.
Defaults non secure
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related
Commands
vxlan-instance— Enable VXLAN Instance configuration on the platform.
vxlan-instance
Enable VXLAN Instance configuration on the platform.
Syntax
vxlan-instance instance ID
To enable the vxlan-instance command, use the [no] shut command.
To delete vxlan-instance from the system, use no vxlan-instance 1 command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the
instance ID 1 in the initial release.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
Virtual Extensible LAN (VXLAN) 2064