Service Manual

Version Description
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information The configuration is cached and sent to LLDP only in one of the following conditions:
1 The port-channel connecting the two VLT domains, across the DC, is a VLT LAG.
2 The protocol lldp command is globally enabled.
3 The proxy-gateway LLDP configuration is applied.
Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain)# proxy-gateway lldp
Dell(conf-vlt-domain)#
proxy-gateway static
Enables the proxy-gateway feature using static configurations.
S4048–ON
Syntax
[no] proxy-gateway static
Command Modes VLT DOMAIN
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage Information
When you add a proxy-gateway static configuration, the setting is saved in the Layer 2
module. When you remove the static proxy gateway configuration, each proxy-
gateway static MAC configured is deleted from the Layer 2 module.
VLT Proxy Gateway 2028