Service Manual

Table Of Contents

The export-target and import-target options support only the match protocol and

match prefix-list options. Other options that you configure in the route-maps are

ignored.

Commands

• ipv6 route-import – imports IPv6 routes from another VRF.

redistribute

Redistributes leaked or exported routes corresponding to specific protocols.

Syntax

redistribute {imported-bgp | import-ospf | import-isis}

Parameters

imported-bgp Enter the keywords imported-bgp to redistribute leaked routes

that are learned using the BGP protocol.

imported-ospf Enter the keywords imported-ospf to redistribute leaked

routes that are learned using the OSPF protocol.

imported-isis Enter the keywords imported-isis to redistribute leaked

routes that are learned using the ISIS protocol.

route-map Enter the name of the route-map to specify the filtering criteria

for imported routes.

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,

and Z9500.

Commands

• ip route-import — import routes from another VRF.

Virtual Routing and Forwarding (VRF) 2022