Service Manual

Version Description
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information The number parameter in the ntp trusted-key command must be the same number
as the number parameter in the ntp authentication-key command. If you change
the
ntp authentication-key command, you must also change the ntp trusted-
key command.
Related
Commands
• ntp authentication-key — sets an authentication key for NTP.
• ntp authenticate — enables the NTP authentication parameters you set.
show clock
Display the current clock settings.
Syntax
show clock [detail]
Parameters
detail (OPTIONAL) Enter the keyword detail to view the source
information of the clock.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
System Time and Date 1969