Service Manual

Version Description
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Updated the start-day and end-day options to allow for
using the three-letter abbreviation of the weekday name.
6.1.1.0 Introduced on the E-Series.
Related
Commands
• ntp trusted-key — configures a trusted key.
• clock summer-time date — sets a date (and time zone) on which to convert the
switch to daylight saving time on a one-time basis.
• show clock — displays the current clock settings.
clock timezone
Configure a timezone for the switch.
Syntax
clock timezone timezone-name offset
To delete a timezone configuration, use the no clock timezone command.
Parameters
timezone-name Enter the name of the timezone. You cannot use spaces.
offset Enter one of the following:
• a number from 1 to 23 as the number of hours in addition
to universal time coordinated (UTC) for the timezone.
• a minus sign (-) then a number from 1 to 23 as the number
of hours.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
System Time and Date 1957