Service Manual

start-month Enter the name of one of the 12 months in English.
start-time Enter the time in hours:minutes. For the hour variable, use the
24-hour format; example, 17:15 is 5:15 pm.
end-week Enter the one of the following as the week that daylight saving
ends:
• week-number: enter a number from 1 to 4 as the number
of the week to end daylight saving time.
• first: enter the keyword first to end daylight saving
time in the first week of the month.
• last: enter the keyword last to end daylight saving time
in the last week of the month.
end-day Enter the weekday name that you want daylight saving time to
end. Enter the weekdays using the three letter abbreviations; for
example Sun, Sat, Mon, and so on. The range is from Sun to Sat.
end-month Enter the name of one of the 12 months in English.
end-time Enter the time in hours:minutes:seconds. For the hour variable,
use the 24-hour format; example, 17:15:00 is 5:15 pm.
offset (OPTIONAL) Enter the number of minutes to add during the
summer-time period. The range is from 1 to 1440. The default is
60 minutes.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
System Time and Date 1956