Service Manual

To delete a daylight saving time zone configuration, use the no clock summer-time
command.
Parameters
time-zone Enter the three-letter name for the time zone. This name is
displayed in the show clock output.
start-month Enter the name of one of the 12 months in English. You can
enter the name of a day to change the order of the display to
time day month year.
start-day Enter the number of the day. The range is from 1 to 31. You can
enter the name of a month to change the order of the display to
time day month year.
start-year Enter a four-digit number as the year. The range is from 1993 to
2035.
start-time Enter the time in hours:minutes. For the hour variable, use the
24-hour format; example, 17:15 is 5:15 pm.
end-day Enter the number of the day. The range is from 1 to 31. You can
enter the name of a month to change the order of the display to
time day month year.
end-month Enter the name of one of the 12 months in English. You can
enter the name of a day to change the order of the display to
time day month year.
end-time Enter the time in hours:minutes. For the hour variable, use the
24-hour format; example, 17:15 is 5:15 pm.
end-year Enter a four-digit number as the year. The range is from 1993 to
2035.
offset (OPTIONAL) Enter the number of minutes to add during the
summer-time period. The range is from 1 to1440. The default is
60 minutes.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
System Time and Date 1954