Service Manual

url
Configure the URL to reach the SupportAssist remote server.
Syntax
url uniform-resource-locator
To delete the URL for the server, use the no url command.
Parameters
uniform-
resource-locator
Enter a text string for the URL using one of the following
formats:
• http://[username:password@]<hostip>:<portNum>/
<filepath>
• https://[username:password@]<hostip>:<portNum>/
<filepath>
NOTE: The host IP for the server may be specified
as an IPv4 address, an IPv6 address or as a DNS
hostname. If using the DNS hostname, the DNS
resolver will need to be configured and enabled.
Command Modes SUPPORTASSIST SERVER
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Usage Information The URL should be formatted to follow the ISO format.
show eula-consent
Display the EULA for the feature.
Syntax
show eula-consent {support-assist | other feature}
Parameters
support-assist |
other feature
Enter the keywords support-assist or the text corresponding
to other feature.
Command Modes EXEC Privilege
SupportAssist 1949