Service Manual

Table Of Contents

phone Enter the keyword phone to specify phone as preferred method.

Defaults no-contact

Command Modes SUPPORTASSIST PERSON

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100

series.

9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,

S5000, S6000, S6000–ON, Z9500, MXL.

Commands

• email-address — configure email addresses to reach the contact person.

• phone — configure phone numbers to reach the contact person.

time-zone

Configure the time zone for contacting the person.

Syntax

time-zone zone +-HH:MM[start-time HH:MM] [end-time HH:MM]

To remove the time zone, use the no time-zone [zone | start-time | end-

time] command.

Parameters

zone +-HH:MM Enter the keyword zone then a time difference from GMT

expressed as HH:MM. This number may be preceded by either a

+ or – sign.

start-time HH:MM Enter the keywords start-time then a starting time expressed

as HH:MM. Use the 24-hour clock format.

stop-time HH:MM Enter the keywords stop-time then a stopping time expressed