Service Manual

phone
Configure phone numbers to reach the contact person.
Syntax
phone primary phone [alternate phone]
To remove a phone number, use either the no phone primary or no phone
alternate commands.
Parameters
primary phone Enter the keyword primary then the primary phone number for
the person.
alternate phone Enter the keyword alternate then the alternate phone number
for the person.
Command Modes SUPPORTASSIST PERSON
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Usage Information
The phone numbers may contain country codes, area codes and extensions, if
necessary. Allowable characters are 0 to 9, x, (, ), - and +.
This command is optional for SupportAssist service configuration.
Related
Commands
• preferred-method — configure the preferred method for contacting the person.
preferred-method
Configure the preferred method for contacting the person.
Syntax
preferred-method {email | no-contact | phone]
Parameters
email Enter the keyword email to specify email as preferred method.
no-contact Enter the keywords no-contact to specify that there is no
preferred method.
SupportAssist 1945