Service Manual

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related
Commands
• forward-delay — changes the wait time before STP transitions to the Forwarding
state.
• max-age — changes the wait time before STP refreshes protocol configuration
information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the
spanning tree bridge.
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
seconds Enter a number of seconds the Dell Networking OS waits before
refreshing configuration information. The range is from 6 to 40.
The default is 20 seconds.
Defaults 20 seconds
Command Modes SPANNING TREE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
Spanning Tree Protocol (STP) 1920