Service Manual

• diffie-hellman-group1-sha1,
• diffie-hellman-group14-sha1
port port-number (OPTIONAL) Enter the keyword port then the port number of
the listening port of the SSH server. The range is from 1 to
65535. The default is 22.
[version {1 | 2}] (OPTIONAL) Enter the keyword version then the SSH version 1
or 2 to specify only SSHv1 or SSHv2.
NOTE: If you enable FIPS mode, you can only select
version 2.
Defaults
• Default listening port is 22.
• Default cipher list is 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-
ctr,aes192-ctr,aes256-ctr.
• When FIPS is enabled, the default is hmac-sha1-96.
• When FIPS is not enabled, the default is hmac-md5,hmac-md5-96,hmac-
sha1,hmac-sha1-96,hmac-sha2-256.
• When FIPS is enabled, the default is diffie-hellman-group14-sha1.
• When FIPS is not enabled, the default is diffie-hellman-group-exchange-
sha1,diffie-hellman-group1-sha1,diffie-hellman-group14-sha1.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Removed the support for hmac-sha2-256-96 algorithm.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced the cipher , kex and mac options on the Z9500.
9.5(0.0) Introduced the cipher, kex and mac options on the Z9000,
S6000, S4820T, S4810, and MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Security 1776