Service Manual

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON, S6000, S6000–ON, S5000,
S4810, S4820T, S3048–ON, S4048–ON, MXL, C9010, S3100
series, and Z9100-ON.
Usage Information
• You can select one or more ciphers from the list.
• The default list of supported ciphers is same irrespective of whether FIPS mode is
enabled or disabled.
• Client-supported cipher list gets preference over the server-supported cipher list
in selecting the cipher for the SSH session.
• When the cipher (-c) option is used with the SSH CLI, it overrides the
configured or default cipher list.
• When FIPS is enabled or disabled, the client ciphers get default configuration.
ip ssh connection-rate-limit
Configure the maximum number of incoming SSH connections per minute.
Syntax
ip ssh connection-rate-limit 1-10
Parameters
1-10 Enter the number of maximum numbers of incoming SSH
connections allowed per minute. The range is from 1 to 10 per
minute. The default is 10 per minute.
Defaults 10 per minute
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Security 1765