Service Manual

dot1x max-eap-req
Configure the maximum number of times an extensive authentication protocol (EAP) request is transmitted
before the session times out.
Syntax
dot1x max-eap-req number
To return to the default, use the no dot1x max-eap-req command.
Parameters
number Enter the number of times an EAP request is transmitted before
a session time-out. The range is from 1 to 10. The default is 2.
Defaults 2
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Related
Commands
• interface range — configure a range of interfaces.
dot1x port-control
Enable port control on an interface.
Syntax
dot1x port-control {force-authorized | auto | force-unauthorized}
Security 1751