Service Manual

show system
Display the status of all stack members or a specific member.
Syntax
show system [brief | stack-unit unit-id | stack-ports {status |
topology}]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an abbreviated
list of system information.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit then the stack
member ID for information on that stack member.
stack-ports status
| topology
(OPTIONAL) Enter the keywords stack-ports for information
about the status or topology of the stack ports.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for the disabled-ports parameter .
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload
mode. To display Reload mode, use the show reload-type
command. Modified the show system stack-unit command
output to support Piece Part ID (PPID).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Control and Monitoring 173