Service Manual

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.6.0.0 Revised introductory and usage guidelines description.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.0 Introduced on the E-Series.
Usage Information
If you configure the aaa authentication login default command, the login
authentication default command automatically is applied to all terminal lines.
When configuring authentication, consider the following:
• If you configure the default authentication list using the default keyword, the list
applies it to all the local and remote connections globally, unless you have
specified some another authentication list for a specific connection.
• If you configure an authentication lists other than default, you must apply those
authentication lists to each connection.
• If you configure the aaa authentication login default command, the
login authentication default command automatically is applied to all
terminal lines.
Related
Commands
• aaa authentication login — selects the login authentication methods.
password
Specify a password for users on terminal lines.
Syntax
password [encryption-type] password
Security 1716