Service Manual

Level 1 is EXEC mode and Level 15 allows access to all CLI
modes.
Defaults level = 15
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Obscure Password Commands
To enable the obscure password, use the following commands.
service obscure-passwords
Enable the obscuring of passwords and keys.
Syntax
service obscure-passwords
Enable the obscuring of passwords and keys, including RADIUS, TACACS+ keys, router
authentication strings, VRRP authentication, use the service obscure-passwords
command.
Defaults Disabled.
Security 1704